The 10 Scariest Things About Ghost Immobiliser Tracker
Autowatch Ghost Immobiliser Fitter
Car thieves are getting more sophisticated and smarter, therefore technology has to change to keep up. Autowatch Ghost immobiliser uses your vehicle's buttons on the steering wheel and centre console to generate an unique pincode sequence that must be entered prior to driving your car.
The device is undetectable to thieves, as it operates on CAN data and doesn't have circuit cuts, which makes it extremely secure and simple to install device. RCA Cheadle are an approved installer of Ghost immobilisers as well as a member of TASSA.
No key fobs or LED indicators
The Autowatch Ghost is the first aftermarket CAN-based immobiliser designed to safeguard your vehicle from key cloning, hacking and key theft. It integrates into the car's CAN data network and is silently operated, so that it is undetectable and cannot be disabled by simple wire cutting.
It creates a unique, variable PIN code sequence (up to 20 presses) by pressing the buttons on your car's steering wheel and door panels which must be entered before you are able to drive. This is the same system that you use to access your mobile banking or credit card and can be changed at any point. This can be done in a matter of seconds on your smartphone, with the app installed or, if prefer, to use your key fob.
This is a key aspect of the system which thieves will find difficult to crack or figure out since it doesn't require extra electronics such as the key fob. The thief cannot guess the code and will have a difficult finding a way escape it. It is also unrecognizable by diagnostics since there are no radio signals being transmitted and it cannot be detected by RF scanners that were used to fake security systems in the past.
It is also weatherproof and can be connected to the vehicle's wiring at any time. It does not cause any damage or marks to your car - making it a great choice for those who value their automobiles and want to improve their security.
The best part is that there aren't any signals being sent. This means that thieves cannot see whether they have hacked the security device or try to evade it. It is a great addition to any car owner's security, especially as the modern cars are becoming increasingly targeted by criminals who are able to take advantage of the new technology found in modern vehicles that are becoming more and more sophisticated.
No Radio Signals
As previously mentioned, unlike other security devices for vehicles that require the use of a key fob or special pin code to turn off the ghost immobiliser, the ghost works quietly and does not emit any radio signals. This is because it connects directly to the CAN data bus, meaning that thieves will have a difficult time trying to detect its presence in your vehicle. The immobiliser will not start your vehicle unless you enter the correct PIN sequence which can only be done via a series of buttons pressed in a specific order. This can be easily controlled via the app.
This makes it more secure than immobilisers that use an active system. In these systems the immobiliser can only disconnect the ECU if the key is connected to an active signal. The systems can be disabled by using a tag or a keypad and by entering a pin number into the keypad, or pressing a particular sequence of buttons. However, the ghost immobiliser cannot be disabled by this method and, therefore, if you've had your car tow-ed or stolen, you'll not be capable of driving it back until you enter the correct pin code.
The ghost immobiliser has also been designed to be resistant to the most sophisticated theft methods like the cloning technique. This is due to the fact that thieves could attempt to duplicate your key fob or even hack into your vehicle's ECU and bypass its security. However, the CAN immobiliser is designed to stop this by creating an individual pin code each time you want to start your car, meaning that it won't be possible to start your car using a cloned key or overriding system.
The CAN immobiliser also offers excellent protection against signal boosters, which are used by thieves to bypass standard security systems that are factory-fitted. It is therefore one of the most effective and reliable immobilisers we fit at Progressive Parts. This is why it's insurance-approved, and it is also a favorite among customers who have to give their car to valet parking or a service. It also has a "Service Mode' that allows your car to be driven temporarily without the need for a PIN code This can be handy when you have guests or valet drivers who want to drive your vehicle.
No Circuit Cuts
Car theft in recent years has become more more common, with organised thieves employing sophisticated diagnostic devices to identify fitted security systems. The Ghost is designed to fight this by not making circuit cuts, it is undetectable by any diagnostics and works quietly on the vehicles CAN data circuit. It is connected to the vehicle's ECU and a unique pin code is entered. This must be used to start the engine. The thief will not be able to steal your car by simply replacing the ECU or by putting in a brand new key. They must first enter the correct PIN code.
The system has a service mode that allows your vehicle to be started and driven without needing your unique PIN. This is ideal for situations where you need to leave your vehicle with a mechanic or valet service. You can also switch it on and off at any time to ensure that nobody else is capable of starting your car, even when you're not there.
Our team of highly skilled experts at MotorGuard are the Midlands' leading ghost immobiliser birmingham Fitters and can assist you in finding the most secure solution for your car's most prized possession. We can advise you on the best way to protect your vehicle from key cloning, hacking or even stolen keys with no need to cut wires.
During our entire Ghost installation process, we offer a full demonstration of how the device works and we will provide the owner manuals as well as the installer's certificate and an Ghost Immobiliser Tracker - Articlescad.Com - emergency card to give you peace of mind. We are fully insured and certified to install the Ghost device. We also offer a warranty should anything go wrong during or after the installation.
The Autowatch Ghost is a subtle device that is the next generation is connected to the CAN data network in your vehicle and has an individual PIN number that you established with our team. The PIN code is entered using buttons on the dashboard and steering wheel to shut off the engine of your vehicle. It is a tiny weatherproof device that can't be detected using traditional methods. There are no LED indicators, and it's completely hidden during installation and fitting. The Ghost is inaccessible to modern, sophisticated RF scanning and code grabbing technology and is also a fully reversible device which can be put in place or removed at any point.
No RF Scanning
An immobiliser standard is designed to prevent your vehicle from being driven if you don't have the appropriate key fob or code to activate it. It does this by sending an immobiliser signal to the ECU. The engine control unit recognizes the signal and shuts off any components that are compromised.
Modern thieves however are always striving to stay a step ahead of automobile manufacturers and have become more adept at using technology like key cloning, hacking (relay attacks) and even key theft itself. They will usually break into your home and take out your letterbox. They can also take your car keys from inside your ignition or your handbag.
The Ghost is the first aftermarket CAN-bus immobiliser on the market that guards you against all of these dangers. It connects to the CAN bus, works silently without radio signals and cannot be identified by RF scanners utilized by organized thieves. It's been TASSA-tested and approved by insurance providers, so you can be assured that it's safe to use and won't affect your warranty.
ghost immobiliser near me II is not detectable by diagnostic tools, in contrast to an immobiliser installed in the factory. It also works independently from any other immobiliser, alarm or tracker that you might install, making it an effective standalone solution that cannot be disabled.
It's simple to use and you only need to enter your pin code and the car will begin to start. The immobiliser has the ability to service valet that can be activated by pressing the buttons on the steering wheel or the door panels. This is useful if you wish to leave your car for a valet service or take it to a garage. You can also alter the pin code however many times you want, to ensure that your car ghost immobiliser is always secure. If you're interested in having a Ghost immobiliser fitted to your vehicle contact us today to learn more and book your appointment with our garage in Liverpool.